Precautions

	Indicates that users may require caution (including warning / caution).
	Alerts users to prohibited actions.
	Restricts user actions / provides instructions.

Negligence could result in death or serious injury.

	This product is not designed to explosion-proof specifications. Do not install or use in locations that can contain flammable gases. This may result in fire or explosion.
	Do not disassemble or modify the station. This may result in fire or electrical shock.
	Do not use with a power supply rated above the specified voltage. This may result in fire or electrical shock.
	Do not use the power supply other than Aiphone specified. This may result in fire or malfunction.
	Do not install two power supplies in parallel to a single input. This may result in fire or electrical shock.
	Do not connect any terminals on the product directly to an AC power line. This may result in fire or electrical shock.

Negligence could result in injury to people or damage to property.

	Do not install or connect the product with the power on. This may result in electrical shock or malfunction.
	Make sure the wiring is correct and there are no wiring shorts before switching on the product. This may result in fire or electrical shock.
	Install in a place where the product will not get easily bumped. This may result in injury.
	Do not put your ear close to the speaker when using the product. May cause harm to the ear if a sudden loud noise is emitted.

Install low-voltage lines at least 30 cm (12") away from high-voltage lines (AC 100V-240 V), especially inverter air conditioner wiring. This may result in interference or malfunction.

When installing or using the station, give consideration to the privacy rights of subjects, as it is the responsibility of the system owner to post signs or warnings in accordance with local ordinances.

If the station is used in areas where there are business-use wireless devices such as a transceiver or mobile phones, it may cause malfunction.

Keep the intercom wires more than 30 cm (12’’) away from AC 100-240 V wiring. AC induced noise and/or unit malfunction could result.

If the station is installed in an area with an extremely strong electrical field, such as in the vicinity of a broadcasting station, it may create interference and cause a malfunction.