Check after installation

After installation, check that the system is functioning in accordance with the operation manual.

If not operating properly

Remove the door station, and then connect it directly to the master monitor station with short, low-voltage wires to check its operation.
If it operates properly, there may be a problem with the wiring. Check the wiring connections.

CAUTION

Be sure to unplug the power supply before removing the low voltage wires.

When the notification LED flashes

The wiring to the door station may be shorted. Check the wiring.
The master monitor station will restart when the short circuit is restored.
For more information on the notification LED, refer to "Notification LED."