WikiWorks
　

JV-1MD/JV-1FD/JV-DV/JV-DVF Operation Manual

Setting the date and time (JV-1MD only)

When the station is powered up for the first time, set the current date and time.

This function may not be available depending on the installation facilities.

The date and time is used for the recording date and time.




NOTE

  • If there is no power supply for 15 minutes or more, the date and time will return to default.
  • A maximum of approx. 80 seconds time gain/loss can occur in the displayed time over a month. It is recommended to correct the time periodically.
WikiWorks