Answering a call

When a call is received from the door station, the ringtone sounds and the video at the door station is displayed.




NOTE

  • If no buttons are pressed, the screen will time out approximately 45 seconds after the call is received.
  • Talk duration is max approx. 60 seconds.
  • Speaking simultaneously at the monitor station and door station may cause intermittent audio.
  • When the ambient noise is loud enough to interrupt the audio, the press-to-talk method is recommended. → Using press-to-talk (for areas with high ambient noise)
  • The ringtone also sounds from the call extension speaker.


About the expansion monitor station
  • If one monitor station answered a call, the image is also displayed on the other monitor station for approx. 45 seconds.
  • Pushing the on one monitor station while the other monitor station is communicating with the door station results in three-way communication.
  • The master monitor station and the expansion monitor station cannot directly call or communicate with each other.